Videos

How to Check if a Robot’s Motor Reducer is Bad

How do you know if your robot’s motor reducer is bad? Acieta Robotic Systems Engineer Chris Bosquez walks you through steps to check the motor reducer.

Read More

How do you know if your robot’s motor reducer is bad? Acieta Robotic Systems Engineer Chris Bosquez walks you through steps to check the motor reducer.

Acieta FastARC Guide – Features and Specifications

If you’re faced with capacity challenges, labor shortages, or quality variability, FastARC standard weld cells from Acieta can help you address key business challenges, fast. Here we showcase our four standard cells; designed to meet the most common robotic welding needs as your swift, straightforward introduction to automation technology.

Read More

If you’re faced with capacity challenges, labor shortages, or quality variability, FastARC standard weld cells from Acieta can help you address key business challenges, fast. Here we showcase our four standard cells; designed to meet the most common robotic welding needs as your swift, straightforward introduction to automation technology.

Quick Daily Checks for Your FANUC Robot

Service engineers from Acieta provide a list of quick checks to perform on your FANUC robot every day.

Read More

Service engineers from Acieta provide a list of quick checks to perform on your FANUC robot every day.

FastLOAD CX1000 Cobot: How to Set Up and Use the Floor Mount Kit

Learn how to set up and use the floor mount kit on a FastLOAD CX1000 collaborative robot by following this demonstration from Acieta’s Jake Corning.

Read More

Learn how to set up and use the floor mount kit on a FastLOAD CX1000 collaborative robot by following this demonstration from Acieta’s Jake Corning.

FastLOAD CX1000 Cobot: How to Teach a User Frame
Acieta’s Jake Corning demonstrates how to establish a user frame for teaching points and jogging the robot on a FastLOAD CX1000 collaborative robot.
Read More
Acieta’s Jake Corning demonstrates how to establish a user frame for teaching points and jogging the robot on a FastLOAD CX1000 collaborative robot.
Programming an Acieta FastLOAD CX1000 Cobot

Acieta’s Jake Corning shares the simple steps to program a FastLOAD CX1000 collaborative robot.

Read More

Acieta’s Jake Corning shares the simple steps to program a FastLOAD CX1000 collaborative robot.

Finding Your FANUC Robot Model and Controller Type

Learn where to find the location of your FANUC robot model and controller type when contacting Acieta or FANUC for service.

Read More

Learn where to find the location of your FANUC robot model and controller type when contacting Acieta or FANUC for service.

Finding Your FANUC F Number

Learn where to find your FANUC F number prior to calling Acieta for service.

Read More

Learn where to find your FANUC F number prior to calling Acieta for service.

Acieta FastLOAD CR2000 Cobot: How to Recover From a Contact Stop

Need to recover from a contact stop on a FastLOAD CR2000 collaborative robot? Follow these simple steps provided by Acieta Programming Manager Brad Lund.

Read More

Need to recover from a contact stop on a FastLOAD CR2000 collaborative robot? Follow these simple steps provided by Acieta Programming Manager Brad Lund.

Acieta FastLOAD CR2000 Cobot: How to Change Grip Diameter

Change the grip diameter on a FastLOAD CR2000 collaborative robot by following this demonstration from Acieta Programming Manager Brad Lund.

Read More

Change the grip diameter on a FastLOAD CR2000 collaborative robot by following this demonstration from Acieta Programming Manager Brad Lund.

Acieta Has Fun at Work With a Tortilla Challenge

At Acieta, we like to work hard and play hard. Recently, 30,000 Mi Mama brand flour tortillas arrived at our Iowa facility for a palletizing project. The team took a break in the shop to test out the tortillas (and the resilience of two employees) for a Tortilla Challenge. Then the tortillas started to fly!

Read More

At Acieta, we like to work hard and play hard. Recently, 30,000 Mi Mama brand flour tortillas arrived at our Iowa facility for a palletizing project. The team took a break in the shop to test out the tortillas (and the resilience of two employees) for a Tortilla Challenge. Then the tortillas started to fly!

Acieta FastLOAD CR2000 Cobot: How to Program a Part

Acieta Programming Manager Brad Lund shares the simple steps to program a FastLOAD CR2000 collaborative robot to load/unload a new part.

Read More

Acieta Programming Manager Brad Lund shares the simple steps to program a FastLOAD CR2000 collaborative robot to load/unload a new part.

To discuss known AUTOMATION OPPORTUNITIES or discover new ones:

Contact Us

Side Image